Shown is the HIT-45ML1 alignment fixture. This is used
to align the function holes used by the mortise lock to
the correct location in the mortise pocket. It will work
with any of our mortise lock templates that use a
1-1/4” wide by a 8” tall faceplate.
One half of the template will screw to the face of
the HIT-45 clamp as shown. Be sure to use the
shorter ( 1/2” long ) of the screws supplied.
The second half of the
template will attach to the
faceplate area. Use a self
centering drill to locate the
screw holes required by
the mortise lock. This will
help with alignment and
prevent binds when the
lock is installed. Use the
factory supplied screws to
attach to the door.
Copyright 2008—Major Manufacturing