To attach the clamp, just slide over the post and tighten
to the door.
Working from one side of
the door, drill all holes that
are required for the lock
function you are using. Drill
holes that go through the
door only half way. The
back of this manual will
identify hole locations and
sizes. All large holes will be
piloted with a 1/4” drill bit
and enlarged with a hole
saw once the clamp is
removed.
This clamp can be used with one or two
templates. If using only one template prep
one side of the door and with the clamp
still in position, remove the template and
install on the other side.
Copyright 2008—Major Manufacturing