Power Management
•Low power: when the system battery voltage is lower than 3.3V
the top right corner of TFT-LCD display battery symbol "
", it
indicates low supply voltage.
•Charging: When the battery voltage less than 4.0V, the top right
corner of TFT-LCD display battery symbol " , , , " it indicates
the battery is charging.
•Full: When the battery voltage greater than 4.0V the top right
corner of TFT-LCD display battery symbol "
", it indicates full battery
voltage.
•Charge standby: TFT-LCD display mode prompt menu "is charging
standby?", press "-","+" button and moving the cursor, press "MODE"
button for confirmation, camera, FTF-LCD, video processor source
was cloded ,system enter in lowest power consumption .
•Battery capacity view: confirm the system in working condition,
long press "+" two seconds, battery symbol display on the top right
corner of TFT-LCD:
indicates battery voltage more than 4.0V,
indicates battery voltage less than 3.8V,
indicates battery voltage
more than 3.6V,
indicates battery voltage less than 3.4V.
7.Notes
•Do not open the housing cover except by qualified technicians.
•Handle with care.
•Camera has waterproof function but the host does not have a
waterproof feature. So please do not put the Video borescope in
wet and raining areas and do not operate in the wet. Once Video
borescope is wet, please turn off then send it to technicians for
maintenance. Moister will damage the Video borescope and cause
electrical failure.
•Please do not point or face the Video borescope into the sun
whether indoors or outdoors. Please do not operate under bright
spotlights, high lights and reflectors.
•Please do operation under the range of the specified temperature,
humidity and power supply. please operate on the range of 0°C
~
50°C
(32°F
~
122°F), humidity below 85% and voltage refered to the manual.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
14
Video Borescope User Manual
