6.Operating
Instructions
Systems Open And Closed
•Power switch: press the power key to switch on, Video borescope systems
to open, once again press the power switch to switch off the Video
borescope system.
•USB charging start:The system will automotically open to charge
in off position. TFT-LCD display mode prompt menu "is charging
standby?", press "-","+" button and moving the cursor, press "MODE"
button for confirmation.
A.Select standby charge, camera, FTF-LCD, video processor source
was cloded, system enter in lowest power consumption.
B.Choose not to charge the standby, system enters normal operating
mode.
C.Normal operating mode, when the battery voltage is greater than
4.0V, the top right corner of TFT-LCD displays "
" battery symbol,
that indicates the voltage is full. When the battery voltage less than
4.0V the top right corner of TFT-LCD display such as "
,
,
,
,"
that indicates the battery is charging. When USB charging starts,
it has no effect to press the power switch. Press "MODE" button on
the panel for a long time to enter standby charge of system.
•Image rotation and image setting
•Image Rotation: Video borescope systems in open, short press8 the
panel "MODE" button to rotate the image 90°
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
9
Video Borescope User Manual
Battery symbol
