Major tech MT785, Manual

NOTE:

  Only AC A functions can do the

 INRUSH

 value measurement.

    1.  Switch off motor and then clamp supply.

    2.  Press the 

INRUSH

 button , “----”will appear in the display.

    3.  Start motor and then read the value on the display.

INRUSH  

To freeze the LCD reading, press the 

HOLD

 button. While data hold is active, 

the 

HOLD

 icon appears on the LCD. Press the 

HOLD

 button again to return 

to normal operation.

Data Hold  

Press 

MAX/IN

 key the maximum and minimum values are measured. 

This mode is activated on each measurement except for continuity test, 
diode test capacitance test, frequency test and duty cycle test.
This mode is disabled keeping pressed 

MAX/MIN

 key or moving the 

rotary switch.

MAX/MIN   

Press the Flash light button to turn the flash light on. Press again to turn 
the flash light off.

Flash Light Button   

The LCD is equipped with backlighting for easier viewing, especially in 
dimly lit areas. Press the backlight button to turn the backlight on. Press 
again to turn the backlight off. Note that the meter does have an auto 
power off feature as described below.

LCD Backlight Button   

In order to conserve battery life, the meter will automatically turn off 
after approximately 15 minutes. To turn the meter on again, turn the 
function switch to the OFF position and then to the desired function 
position.

Automatic Power OFF   

17

Bluetooth Off: Bluetooth logo is not displayed on the screen
Bluetooth On: Bluetooth logo is displayed on screen
Hold down the mode button to select the bluetooth function

Bluetooth   

17