_
Press and hold the power button for >2 seconds to switch
ON
the
unit. A start-up screen (a thermal image) will appear, The unit is
now ready to use; to switch
OFF
, press and hold for > 2 seconds.
Note
: that the
Auto Power OFF
function switches the unit
OFF
automatically after a programmed period of time.
_
With the power
ON
, the battery status icon
is located at
the top left of the display.
_
When battery power is low, connect to an
AC
source or a computer
USB
port using the supplied
USB
cable (
USB
port is located at top
of the unit).
_
With power
OFF
, the battery charging
Red LED
is
ON
when
connected to an
AC
source or connected to a computer
USB
port.
If the
Red LED
is
OFF
, it indicates the battery is full.
_
The unit can also be powered up and in use while charging in which
case the battery symbol
is animated on the upper left.
3.2.Powering and charging the thermal imager
6
