9
www.major-equipment.com
Mowing - All Models
1. The MAJOR Topper is designed to operate at a max 540 rpm. Always operate on level ground when connecting /
unconnecting the implement. This will prevent dangerous movement.
2. Never allow anyone to stand between the tractor and the TOPPER Ensure the machine is hitched correctly to the
tractor as previously described
3. Ensure cutting decks are lowered to the ground.
4. Start up the tractor PTO at a low RPM.
5. Build up to operating speed, select a suitable forward gear & proceed to cut grass.
9FTGDX – Wheel Assembly
The wheel assembly is not suitable for reversing. Place the pin in the appropriate location for either transport or mow-
ing.
Adjusting the skids and cutting height
Adjust the skids by lifting the machine and removing the four skid retaining bolts & relocating the skid to the desired
height.
Hydraulic Breakaway Adjustment
The relief valve is located as shown on the hydraulic ram.
1. Anchor the position of the Allen Screw using the Allen key
2. Slacken off the Collar Nut
3. Wind in the Allen Screw to increase the resistance (i.e. prevent the body from slipping back).
4. Lock the Allen Screw in the new position with the Collar Nut
