2
www.major-equipment.com
Register Your Product and Warranty Online
To register your product through the Internet, simply go to the Support section on www.major-equipment.com. Com-
pleting the information, either online or with the product warranty card, will ensure the customer that their product
receives all post sales service and important product information.
Safety
Machine Safety Labels
The machine safety labels shown in this section are placed in important areas on your machine to draw attention to
potential safety hazards.
On your machine safety labels, the words DANGER, WARNING, and CAUTION are used with
this safety-alert symbol. DANGER identifies the most serious hazards.
The operator’s manual also explains any potential safety hazards whenever necessary in special
safety messages that are identified with the word, CAUTION, and the safety-alert symbol.
Operating Safely
The MAJOR Topper is designed to operate at 540 RPM. Ensure tractor PTO output is set at 540 RPM. The MAJOR
Topper must only be used for cutting grass. Moreover, it must only be used with a suitable tractor (see product specifi
-
cations) and driven by an adequate drive-line by the tractor PTO. All other use is strictly prohibited.
Users should become thoroughly familiar with the contents of this manual before using, servicing and mounting the
implement to the tractor and all other pertinent operations. Never wear jewellery, loose clothing such as ties, scarves,
belts, unbuttoned jackets or dungarees with open zips which could become caught up in moving parts.
Always wear approved garments complying with accident prevention provisions such as non-slip shoes, ear muffs,
goggles and gauntlets. Wear a jacket with reflecting stickers if the implement is used near public highways.
Consult your retailer, the Labour Health Service or your nearest equivalent authority for the information about the cur-
rent safety provisions and specific regulations with in order to ensure personal safety.
To avoid injury, read the manual
Fold the PTO stand down before removing the
transport pin to avoid PTO shaft damage
Rotating blade hazard
High oil
pressure hazard
PTO entanglement
hazard - keep clear
of PTO drives.
Moving parts
hazard
