5
www.major-equipment.com
SAE EP90 gear oil through the oil filler plug indicated. The correct level is at the oil level plug indicated. Check the oil
level in the Rotor Gearboxes and top up as required with SAE EP 90 gear oil through the oil filler plugs indicated. The
correct level is at the oil level plug indicated
2. Grease the PTO shaft universal joints, drive shaft bearing and carrying arm pivots.
3. Re-sharpen old blades with a grindstone if necessary. Replace bent blades with new ones.
4. Check the blade mounting bolts are tight
5. Ensure the gearbox shaft nuts are tight and retained in place by split pin.
6.
Check tightness of all nuts, bolts and retaining screws after the first and second hours of work.
7.
Ensure safety guards and flaps are in place at all times where fitted.
8.
Due to the corrosive nature of grass when cut, wash down the machine when finished mowing, especially when
the machine is being stored for a long period of time.
Always ensure the PTO shaft yoke ends are locked onto the splined shafts on both the tractor and the im-
plement. An unlocked shaft could slip out of position, causing notable mechanical damage and serious injury
to both operator and bystanders.
Key to Main Parts
9FTGDX and 909HD
No
Name
1
A Frame
2
Strap
3
PTO guard
4
Gearbox cover
5
Rotor gearbox
6
Back guard
7
Skid
8
Front guard
9
Wheel option 909HD &
9FTGDX only (if ordering
a wheel kit post sale,
please contact MAJOR
for fitting instructions)
Overlap blade
Undersole skid
Blade
mounting bolts
Blade pivot
bush
Cranked blade
Blade clamping
bolt
Split pin
Gearbox shaft nut
Blade pivot bolt
