If you have poor reception of some stations (burbling), you may wish to list only stations with good signal
strength.
To start a scan manually, choose Full scan. To scan only stations with good signal strength, select Local
scan.
Once the scan is complete, the radio shows a list of available stations. To remove stations that are listed but
not unavailable, choose Prune invalid.
Presets
To store an Internet radio preset, press and hold the “PROGRAM” on Remote Control until the display shows
the “Save preset” screen. Select one of the 40 presets to save the current station and press “OK” to con rm.
Or press 0 to 9 on the Remote Control to store the current playing station into the preset directly.
To select a preset, press brie y the “
PRESET
” button on the unit or “
PROGRAM
” on Remote Control, then
select one of the listed preset stations and press “
OK
” to con rm. Or press 0 to 9 on the Remote Control to
directly recall the presets.
Now Playing Information
While the stream is playing, the screen shows its name and DLS (Dynamic Label Segment) information
broadcast by the station giving real-time information such as program name, track title and contact details.
Stereo broadcasts are indicated with an icon at the bottom of the screen. To view further information, press
“
INFO
” on the radio. Each time you press “
INFO
” on the radio, another set of information is displayed, cycling
through DLS text, program type, ensemble name/frequency, signal strength/error rate, bite
rate/codec/channels and today’s date.
Settings
Dynamic Range Compression (DRC)
If you are listening to music with a high dynamic range in a noisy environment, you may wish to compress the
audio dynamic range. This makes quiet sounds louder, and loud sounds quieter. You can change DRC as off,
low or high.
Station Order
You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or Valid.
Ensemble lists groups of stations that are broadcast together on the same ensemble. Valid lists valid stations
rst, alphanumerically, then off-air stations.
FM
FM radio mode receives analogue radio from the FM band and displays RDS (Radio Data System) information
about the station and where broadcast. To full scan, press “INTRO” remote key. The frequency display starts
to run and scans the FM full band. To ne tune press the ““ or “” remote key. The unit search in 0.05 MHz
steps.
Preset
To store an Internet radio preset, press and hold the “
PROGRAM
” button on Remote Control until the display
shows the “Save preset” screen. Select one of the 40 presets to save the current station and press “
OK
” to
con rm. Or press 0 to 9 on the Remote Control to store the current playing station into the preset directly.To
select a preset, press brie y the “
PRESET
” button or “
PROGRAM
” button on Remote, then select one of the
listed preset stations and press “
OK
” to con rm. Or press 0 to 9 on the Remote Control to directly recall the
presets.
Now Playing Information
While the stream is playing, the screen shows its frequency, or if RDS signal is available, station name and any
further RDS information such as program name, title and other details. Stereo broadcasts are indicated with
an icon at the bottom of the screen. To view further information, press Info button on the radio. Each time you
press “
INFO
” button on the radio, another set of information is displayed, cycling through Radio text, program
type, frequency and today’s date.
Scan Settings
