9
Instructions Guide
DAB/DAB+ Radio
Press the ‘Power/Mode’ button (
Ref.4
) to switch to DAB/DAB+
Radio. In DAB/DAB+ mode, the radio will synchronize with the
time and date of the station.
Ensure that the antenna is fully extended so that the best signal
is being received for the radio scan (
Ref.3
).
On first use, the radio on DAB mode will automatically scan
all stations and save them. If the radio has not automatically
started a scan, you can start an auto scan by pressing the ‘Scan’
button (
Ref.6
) and then release. This will start scanning up the
frequency band and store all stations that have good signal.
The radio will automatically save all the stations with a strong
signal, up to 240 MHz. After searching has finished it will
automatically play the first station stored.
To browse through all stations that have been stored, use
the ‘Skip Back’ and ‘Skip Forward’ buttons (
Ref.11
/13
) to scroll
through them. The station will automatically begin playing
without needing to select it.
When you turn the radio on again after it switching off, it will
automatically tune to the same station (DAB or FM) that was last
selected.
When listening to a DAB station, you can view information about
the station by pressing the ‘Menu’ button (
Ref.5
)
Summary of Contents for Castle CB3A-CDAB-BLK
Page 1: ...CB3A CDAB BLK CASTLE Instructions Guide Compact Music System...
Page 28: ......
Page 29: ...www majorityradios co uk...
