10
Instructions Guide
DAB/DAB+ Preset Stations
How to store a preset radio station
Up to 10 DAB/DAB+ stations can be preset for easy navigation
and listening. To store a station that you are currently playing, it
is best to be listening to the station.
To preset your chosen station, press and
hold
the ‘Preset’ button
(
Ref.7
) until “Preset Store <1: (Empty)” shows on the screen.
Use the ‘Skip Back’ or ‘Skip Forward’ buttons (
Ref.11
/13
) until the
number displays that you wish to save the station preset number
as. To select your choice, press down the ‘Volume/Select’ dial
(
Ref.9
).
The display will then show “Preset [x] Stored”.
Repeat the same process when making other preset stations. To
remove a station as a preset, simply save a new station over it.
How to play a preset radio station
Press the ‘Preset’ button (
Ref.7
) to view the preset stations you
have saved (do not hold button).
Scroll through your preset stations with the ‘Skip Back’ or ‘Skip
Forward’ buttons (
Ref.11
/13
) until the station displays that you
would like to play.
Once your chosen station displays that you wish to play, simply
press down the ‘Volume/Select’ dial to select it to play.
Instructions Guide
FM Radio
Press the ‘Power/Mode’ button (
Ref.4
) to switch to FM Radio. The
first time you do this, FM frequency “87.50MHz” will be displayed
on the screen.
Ensure that the antenna is fully extended so that the best signal
is being received for the radio scan (
Ref.3
).
To auto scan up the bandwidth, press and release the ‘Scan’
button (
Ref.6
). This will start scanning up the frequency band
and save available stations. The first available station with strong
signal will begin to play.
To fine tune or search for stations, use the ‘Skip Back’ or ‘Skip
Forward’ buttons (
Ref.11
/13
). You can press and release these
buttons multiple times to browse through slowly, or press and
hold
the buttons to search quickly.
Press down the ‘Volume/Select’ dial to switch between Mono
and Auto. Mono will play the same through both speakers and
Auto will offer a better stereo sound.
When you turn the radio on again after it switching off, it will
automatically tune to the same station (DAB or FM) that was last
selected.
When listening to a FM station, you can view information about
the station by pressing the ‘Menu’ button (
Ref.5
).
