19
Sleep Setting
Settings: Clock and Date
Instructions Guide
The date and time will automatically set after using DAB radio
and will show when system is in Standby. If you wish to manually
set the time and date, select this option. The below options will
then display:
Manually Setting the Time
Press and
hold
the ‘Menu’ button (
Ref. 5
) for 1 second to open
the menu settings options.
Scroll through to “Clock Setting” by using the ‘Skip Back’ (
Ref.11
)
and ‘Skip Forward’ (
Ref.13
) buttons. Select “Clock Setting” by
pressing down the ‘Volume/Select’ dial (
Ref.9
) on top of the
system once.
You now need to set the clock as 12 or 24 hour. Use the ‘Skip
Back’ and ‘Skip Forward’ buttons to browse between 12 or 24 and
select your option by pressing down the ‘Volume/Select’ dial.
The time hour will then flash and you can change it using the
‘Skip Back’ and ‘Skip Forward’ buttons. To confirm the hour, press
down the ‘Volume/Select’ dial once on the time you require. The
display will then automatically move on to the minutes to repeat
the same process.
Once you have set the time, you can change the date by
entering menu settings options and selecting “Date Setting”.
Please follow the guidance on the following page for this.
