MAJORITY Chesterton CB4-DAB-BLK, Instruction Manual

18

Instructions Guide

Additional Features

Power Supply and Charging

The unit is mains powered by a UK Standard DC 5V 1A power 
plug.

To make the radio portable and to use on the go, simply 

charge up the radio with the supplied power cable via the DC 5v 
in (

Ref.12

) for portable playtime.

When the radio is charging, the indicator light (

Ref.13

) will turn 

red. Once it is fully charged, the indicator light will turn blue. The 
radio will now over 5 hours of portable play.

Headphone Jack

To begin listening to digital and FM radio with your own 
earphones, simply insert the 3.5mm port into the radio’s 
headphone jack (

Ref.14

).

Troubleshooting

Observation

Potential Cause/Solution

No sound

The station is not tuned in properly. Please perform a 
rescan for available stations or manually scroll through 
available stations.

Buttons are not 
working

Turn off the unit and turn on after a few seconds. Please 
also try unplugging/replugging the radio.

FM: Static sound

DAB: Burbling/
intermittent cut-out

Signal reception is low. Adjust the aerial or move the unit 
to a stronger signal location.
Re-scan stations and or/ a factory reset.

Sound is distorted

The volume is too high. Adjust the volume control.

Desired station not 
found

Weak signal. Use the manual tune function and try 
rescanning in a different area.

Display shows          
“No Service”

There is no DAB coverage in your area, or poor reception. 
Adjust the position of the aerial, or move the unit to a 
stronger signal location.

Display is blank

This may occur if the broadcaster changes the label of a 
service or removes a label while tuned. The radio will try 
to retune or perform a scan.

Time and Date not 
setting automatically

Go to DAB mode and this will automatically set once a 
scan is performed. Alternatively, set in your ‘Settings’.

Other problems/
functional issues

Please perform a factory reset of the radio in radio 
settings.