9
DAB/DAB+ Radio Settings
When on DAB/DAB+ mode, press the Menu button (
Ref.6
)
on the radio to open DAB radio settings. Once pressed, the
following options will be available to scroll through with the
Scroll/Select dial (
Ref.5
) and can then be selected to open
further setting options:
Full Scan
Select this option to initiate a scan for available DAB/DAB+
stations. Once selected, the screen will display “Scanning...” as it
scans for stations with good signal. Once the scan is complete,
the first available station will begin to play.
Manual Tune
Select this option to manually tune the radio and scroll through
stations by multiplex and frequency with the Scroll/Select dial.
Once the chosen multiplex and frequency displays, select it to
play by pressing down the Scroll/Select dial. Once a station is
selected, the radio will then display the signal strength of that
station selected - if the signal is poor, the station will not play.
Prune
The prune option allows you to remove all unavailable stations
from the station list so that only available stations will display.
Select the Prune option, and the screen will display “Prune?”
followed by Yes or No. To select prune, use the Scroll/Select dial
to highlight “<Yes>” and select it by pressing down the dial.
System
View system setting options from page
17
of the manual.
Instructions Guide