The station will begin to play. To select the previous or next station, go back to the list and use the navigation
dial or the remote navigation buttons to scroll accordingly.
DAB/DAB+ Radio Settings
In DAB/DAB+ mode, press the MENU button on the unit or on the remote control to open DAB/DAB+ settings.
You will be able to view the following options:
Station List
Browse through the available DAB/DAB+ stations.
Scan
Initiate a scan for available stations.
Manual Tune
Browse through available stations by multiplex and frequency.
Prune Invalid
To remove stations that are listed but unavailable, you can turn on the ‘Prune’ setting. To switch on the Prune
setting, select “Yes”.
DRC (Dynamic Range Compression)
Select this option to reduce the volume of louder sounds and boost the volume of quiter sounds. Choose
between High, Low or Off.
Station Order
Select the order that you would like the DAB/DAB+ stations to display in. Options include alphanumeric,
ensemble and valid.
System Settings
– Select to open system settings. Further guidance on these options can be found under
section ‘System Settings’.
Main Menu
– Select to view available modes.
DAB/DAB+ Station Information
Whilst playing a DAB/DAB+ station, the following station information can be viewed by pressing the ‘Info’
button on the unit or on the remote.
Programme Information:
Displays artist and song currently playing.
PTY (Programme Type):
This shows the type and description of the programme provided by the DAB station.
Channel and Frequency:
Displays the station transmission channel number and frequency.
Signal Error/Strength:
Displays station signal strength.
Bit Rate, Codec and Sampling Rate:
The data rate at which the signal is being transmitted.
Today’s Date:
Displays the date as provided by the broadcaster.
FM Radio
Press the ‘Mode’ button on the unit
(Ref.4)
or on the remote
(Ref.37)
until FM mode is selected.
