5
Instructions Guide
Press and
hold
the ‘Standby/Dimmer’ button (
Ref.12
) to turn
the radio on. To select DAB mode, press the ‘Mode’ button
repeatedly until “DAB” appears on the display screen.
Fully extend the antenna (
Ref.17
) to ensure that you receive the
best signal.
To begin searching for available stations, perform an auto scan
by pressing the ‘Scan’ button (
Ref.13
) and then releasing. This will
start scanning up the frequency band and store all stations that
have a good signal.
The radio will now begin to search for available station and will
automatically save all the stations with a strong signal. After
searching has finished, it will automatically play the first station
stored.
To browse through all of the stations that have been stored, use
the ‘Next’ (
Ref.16
) and ‘Prev’ (
Ref.14
) buttons to scroll through
the stations. To select a station to play, ‘Enter’ button (
Ref.15
) to
confirm your selection.
When you power up the radio again after switching off, it will
automatically tune to the same station (DAB+ or FM) that was
last selected.
DAB/DAB+ Radio