7
EN
Additional Info
Automatic Subwoofer Pairing
The Majority Teton Plus soundbar will automatically pair to the subwoofer when
both items are switched on. The Pair LED on the rear of the subwoofer will
flash when searching for connection, then remain static when connected.
IMPORTANT
The Pair Reset button on the rear of the subwoofer (
Ref.15
) should not be
pressed unless you need to pair with a new subwoofer. If this button is
accidentally pressed, the soundbar has a default reset that it will reconnect to
the existing subwoofer after 90 seconds.
Automatic Power Off Function
The Majority Teton Plus will automatically go to standby mode after 180 minutes
if the connected TV is switched off, or if there isn’t any audio signal in.
Wall Mounting
The Majority Teton Plus can be mounted to a wall using the appropriate fittings
for your wall type by using the wall mounting brackets positioned at the rear of
the unit. As these differ between wall types the fittings are not included. To wall
mount the Teton soundbar, the appropriate fittings for your application will need
to be sourced.
Summary of Contents for Teton Plus
Page 1: ...User Manual H O M E A U D I O C A M B R I D G E Teton Plus...
Page 22: ......
Page 23: ......
Page 24: ...www majority co uk...