12
5 . O P E R AT I O N
JOYSTICK AND CONTROLLER
Your Mambo is operated by your joystick and controller. The Mambo is
currently available with one of two controller options:P&G VSI
VSI Series CONTROL FUNCTIONS
1.ON/OFF Button 2. Battery Gauge
3. Joystick
4.Maximum Speed / Profile Indicator
5.Speed / Profile Decrease Button 6.Horn Button
7. Speed / Profile Increase Button
■
■
■
■
HOW TO OPERATE YOUR POWER CHAIR
◆
ON/OFF Button
The ON/OFF button applies power to the control system
electronics , which in turn supply power to the power chair’s
motor. Do not use the ON/OFF button to stop the power chair
unless there is an emergency.
Attention:
If you do, you may shorten the life of the power chair drive components.
◆◆◆◆
Battery Gauge
The battery gauge shows you that the power chair is switched on. It also indicates the operating status of
the power chair
◆
Joystick
The primary function of the joystick is control the speed and direction of the power chair. The further
you push the joystick from the center position the faster the power chair will more. When you release
the joystick the brakes are automatically applies.
◆
Maximum Speed / Profile Indicator
This is a gauge that shows the maximum speed setting of the power chair.
There are five speed settings-step 1 is the lowest speed and step 5 is the highest speed.
1
2
3
4
5
6
7