21
7 . I N S P E C T I O N A N D M A I N T E N A N C E
Attention
When conducting maintenance of your power chair, please turn the power switch to OFF and remove
the charger cords.
■
UPHOLSTERY
All upholstery can be washed with warm water and mild soap. Some power chair upholstery cleaners
produce excellent result as well. Occasionally check the seat and back for sagging, cuts and tears.
Replace if necessary. To avoid mildew and rapid deterioration of upholstery parts, do not store you
power chair in damp conditions.
Suggestions
1.Do not splash water directly to wash your power chair as this could lead to malfunction of the system
electrics.
2.Do not use petrol, solvents or vaporizing solution as these may deform or damage the shrouds.
3.Do not use wax.
■
■
■
■
S TORAGE
Make sure the power chair is stored under the following circumstances:
-
Make sure the charger is unplug position.
-
Make sure the power switch is turned to “OFF”
Suggestion
Please store the power chair in a location where it is out of direct sunlight, rain, or dew. When storing for
a long time, please charge the battery to full power and then disconnect the battery terminal. For details
inquire to your dealer.
■
FOLDING THE POWER CHAIR
To fold the power chair, it is necessary to remove certain components. Follow these simple guidelines:
1. Park the chair on a level surface.
2. Ensure the wheels are in drive mode.
3. Fold up footplates and/or remove the entire leg rest assemblies.
4. Disconnect the back and red connectors situates under the seat.
5. Carefully pull out the first rear battery out of the basket by using the lifting strap(battery is
heavy).Then pull out the battery box by lifting up.
6. Slide second battery forward and follow the same steps as 5. to pull out the second battery box.
7. Remove seat cushion, carefully place hands under the seat bottom and give a sharp pull upward. This
will pull the entire frame together.
