17
5 . D R I V I N G O N T H E R OA D
5.1 Stopping
1. Release the wigwag paddle completely. The vehicle will naturally brake and stop.
2. Turn the scooter off at the key ignition. Then pull out the key.
Attention
♦
The stopping distance will vary with your forward / reverse speed. Therefore please
begin braking as early as you can.
♦
While parking your scooter, be sure to park on flat ground and then turn the power to
“OFF” before you get off.
5.2Main Circuit Breaker (Reset Button)
When the voltage in your scooter’s batteries becomes low or the scooter is heavily
strained because of excessive loads or steep inclines, the main circuit broker may trip to
protect the motor and electronics from damage.
The location of the circuit breaker is shown by the arrow on the photograph (below).
If the circuit breaker is activated (tripped) simply push the black button back in to rest
the circuit breaker.
Please note the normal position of the circuit breaker button as a point of reference.
The button protrudes by 2mm ~ 3mm when operating normally, and protrudes by
protrudes by 7mm ~ 8mm when the circuit breaker has activated.
