27
7 . I N S P E C T I O N A N D M A I N T E N A N C E
7.8 Assembling The Scooter
Suggestions
The assembly process is essentially the disassembly process in reverse. First study the
text and photographs in the disassembly procedure before re-assembling the scooter.
1. Position the front and rear sections of
Tempo3/Tempo4
.
2. Align the lower curved locking brackets of the front section with the corresponding pegs on the front
of the rear section.
3. Holding the seat post, slowly pivot the rear section forward until the curved locking brackets are fully
connected onto the top rear pegs.
4. Secure the lock pin into the pin hole.
5. Loose tiller adjustment knob, raise the tiller, then retighten the tiller adjustment knob.
6. Reinstall the batteries and secure them with the hook-and loop strap.
7. Connect the front-to rear harness and battery cables
8. Reinstall the rear shroud.
9. Replace the seat and rotate it until it locks into its correct position.
Warning
After assembling the
Tempo3/Tempo4
, make absolutely certain the tiller adjustment
knob is fully tightened.
