25
S
15
TEP
Attach the main lid handle with two
1/4”-20 x ½” screws, two 1/4” lock
washers, and two 1/4” x 5/8” flat
washers. Install the washers inside the
lid, with the lock washer between the
lid and the flat washer. To more easily
slide the grip onto the handle before
installation, squeeze 2-3 drops of dish
soap down the center.
This
product contains a chemical known to
the state of California to cause cancer.
WARNING!
Place the ash cleanout cover over the
hole between the firepot and grease
shield.
To install the small handles onto the
pellet hopper lid, warmer box lid, and
grease drawer, use two #6 x 3/8”
screws and #6 x 3/8” lock washers per
handle.
S
19
TEP
The grease drawer slides into the
opening below the warmer box.
The triangular grease shield goes inside
the grill body on the right side. Place the
clip on the grease shield toward the
firepot and overlapping the grease shield
flange. The top groove on the grease
shield should be placed over the top
edges of the “V” shaped flange closest to the firepot.
S
17
TEP
S
16
TEP
S
18
TEP
S
15
TEP
S
16
TEP
S
18
TEP
TWO STAR GENERAL
ASSEMBL
Y