tELHARMONIC Panel Controls (Cont’d)
22. FLUX Combo Pot: unipolar Combo Knob. With nothing patched to FLUX CV INput, functions as a
standard panel control. When a control signal is patched to the FLUX CV INput, functions as an
attenuator for that signal as it is applied to the FLUX paramater.
FLUX has a different effect on the N, H, and P OUTputs:
-N OUT: increasing FLUX focuses the noise around the Fundamental, as set by TONIC and DEGREE.
-H OUT: At 0V (FLUX Fully CCW), all Harmonics are equally emphasized. Increasing FLUX
de-emphasizes all Harmonics surrounding the CENTROID, with the exception of those that are
currently locked by H-LOCK. This de-emphasis has the effect of emphasizing the CENTROID.
-P OUT: FLUX sets the Index of Phase Modulation-- the ratio is set by CENTROID. The response is the
inverse to that of the H and N OUTs. At 0V (FLUX Fully CCW), maximum Phase Modulation is
achieved. Gradually increasing this parameter decreases the Index of the Phase Modulation.
23. FLUX CV IN: unipolar control INput for FLUX. Range 0V to +8V.
23
22
Summary of Contents for Soundhack tELHARMONIC
Page 1: ...v 2 2...