background image

mBot Mega_说明书_D1.1.6_KD010396000_Print.indd   4-1

��

Caution:

·Recommended for children of ages ��+.

·Not suitable for children under ages �.

·Children need to be accompanied by adults when using the product.

·To avoid damage as a result of falling down, please don't put the product on the edges of high places.

·To avoid the product damage, please don't disassemble, repair or modify this product yourself.

·Please don't use this product or charge for this product in any environment with temperature above the operating temperature range of this product.

·Please fully charge the product for storage and recharge it every � months when the product is left unused.

·Please use the recommended adapter (�V / �A adapter) to charge the product.

·The adapter used to charge the product (not included in the package) can not be used as a toy.

·The product should be connected to the power supply in strict accordance with the limit on the number of power supplies. 

·Please check the wires, plugs, housings or other parts periodically and stop using them if any damage has been found until they are well repaired.

Before connecting the Mega by the APP, please make sure that the GPS 

and Bluetooth are turned on and authorized to the APP.

When the battery power is too low, there is a chance that it will lead to Bluetooth 

disconnection, and this will be more likely to happen in high-speed mode.

Summary of Contents for m Bot mega















Reviews: