mScara User Guide
9/ 17
B). Drag the led SVG format to change the size and location of the SVG drawing, or change
the drawing size by directly entering the digit on the low right of the graph.
c). While leading BMP file, the software automatically pop up SVG file change dialog box,
and according to adjustment parameter, change the file to SVG format.
(
4
)
Function description of setting area
a). Single click button to open the setting interface as shown in the following figure.
b).The length of arm A is determined value, and the length of the arm B is the installation
size of mScara machine.
Fill after accurately measuring by paper rule or steel rule
.
c). The speed may be adjusted from 0 to 100%, and 50%-80% speed range is recommended
for mScara. More than 80% is not recommended.