How to Connect Your Phone
to the Printer?
Refresh
>
Q1-Not cnnected
Add a device
How to Install the Labels?
Please use the MakeID official labels,
otherwise it might cause damage to the
printer or poor printing.
Open the APP and connect to the printer
(remember to grant Bluetooth permis-
sion)
“MakeID-Life” APP is required in order
to use the printer. Connect to the
printer in the APP rather than the
Bluetooth in the phone system.
Step 1:
Open the APP, search and
connect to the printer (remember to
grant Bluetooth permission).
Step 2:
Select the printer type for
first-time users.
Step 3:
Click on the right top of the APP
to search for the device, and then click
to connect.
Step 2:
Close the top cover, then edit and
print in the APP. (If the label is improperly
installed, the indicator will be in red)
Step 1:
When using a new roll of label, pull
out the transparent label lead all the way to
the paper exit.
Type-C Input
5V
2A input for charging. The product
does not come with a power adapter. A
standard Type-C charging plug is sufficient.
Battery:
7.4V/500MAH. It takes 1.5 hours to
be fully charged.
Please charge at intervals of 3 months for
long periods of non-use so that the
lithium battery does not wear out natually
over time.
Tips: Long press the Power On/Off button
to turn off the printer, or leave it for 30
mins for automatic shutdown.
★Charging instruction
03
04
Joint
Pull it out to
the paper exit
Transparent
non-printable
Transparent label lead
non-printable
Q1 Q1AH22D00003
