background image

 

 

 

UDD-SD-116/

 

Release Date: 31.12.2014/Rev No: 1/Rev. 

Date

: 27.04.2015

 

                               

24

 

 

Press and hold 

 for more than 2 seconds: Circularly and orderly display the items every 2 

seconds, when press and hold the key for some time again, it will turn to output status. 
Function setting mode: 
Press and hold the key 

or

 for more than half a second (less than 2 seconds): Select the 

set option. 

 FUNCTION SETTING KEY 

 

Non-function setting mode: 
Press and hold the key for more than 2 seconds: Function setting interface. 
Function setting mode: 
Press and hold the key for more than half a second (less than 2 seconds): Enter the function 
setting option. 
Press and hold the key for more than 2 seconds: exit from this function setting interface. 

4.2 LED Function 

 

Number 

LED 

Explanation 

① 

Inverter LED  Inverter green LED is on: UPS is normally powered by Line mode or ECO 

mode or BAT mode. 

② 

Battery LED  Battery yellow LED is on: Battery mode. 

③ 

Bypass LED  Bypass yellow LED is on: Bypass mode or ECO mode, etc. 

④ 

Warning LED  Warning red LED is on: UPS fault. For example: Overload beyond the 

allowed time, inverter fault, BUS fault, over temperature fault, etc 

 

PS: LED display detail in different mode is listed at the back. 

4.3 LCD Display Function 

LCD displays as following figure. 

 

Summary of Contents for PowerPack SE 1 kVA





















































Reviews: