UDD-SD-116/
Release Date: 31.12.2014/Rev No: 1/Rev.
Date
: 27.04.2015
28
more than half a
second(less than 2 seconds), select the function setting, choose the bypass
output interface, at the
moment, the letters “BPS” will flash.
2.
Enter the Bypass output setting interface. Press and hold the function setting key
for
more than half a second(less than 2 seconds), then come to setting interface of BPS, at this
time, the
letters “BPS” will not flash any more. The “ON” letter will flash. Press and hold the
inquiring key (
,
)
for more than half a second (less than 2 seconds) to determine
whether the BPS function
is used or not. If used, the corresponding word is “ON”, if not, the
word is “OFF”. It can be
determined by yourself.
3.
Confirm the Bypass output setting interface. After selecting ON or OFF, press and hold the
function setting key
for more than half a second (less than 2 seconds), Now, the BPS
setting function is completed and the “ON” or “OFF” will light without flash.
4.
Press and hold the function setting key
for more than 2 seconds, exit from the setting
interface and return to main interface.
5.
After setting BPS ON, without turning on the UPS whatever mains power being plugged in or
not, there is bypass output but no backup function.
4.6.3 Output Voltage Setting
1.
Enter the setting interface. Press and hold the function setting key
for more than 2
seconds, then come to setting interface, press and hold the inquiring key (
,
)
for
more than half a second(less than 2 seconds), select the function setting, choose output voltage
setting interface, at the moment, the letters “OPU” will flash.
2.
Enter the output voltage setting interface. Press and hold the function setting key
for
more than half a second(less than 2 seconds), then come to setting interface of output voltage
OPU, at
this time, the letters “OPU” will not flash any more. The numerical value next to
the OPU will flash.
Press and hold the inquiring key (
,
)
for more than half a second
(less than 2 seconds), select the numerical value in accordance with “OPU” function. The
