25
UDD-SD-112/
Release Date: 25.12.2014/Rev No: 1 /Rev.
Date
: 18.05.2015
4.6.2 Input Methods Setting
1.
Enter the setting interface. Press and hold the function setting key
for more than 2
seconds, then come to setting interface, press and hold the inquiring key (
,
)
for
more than half a second(less than 2 seconds), select the function setting, choose output
voltage setting interface, at the moment, the letters “IPP” will flash.
2.
Enter the IPP setting interface. Press and hold the function setting key
for more than half
a second(less than 2 seconds), then come to setting interface of IPP, at this time, the letters
“IPP” will not flash any more, the numerical value next to the IPP will flash. Press and hold the
inquiring key (
,
)
for more than half a second (less than 2 seconds) to select the
numerical value. There are two Input methods, the value ‘1’ means single phase input, the
value ‘3’ means three phase input. The default input method is single phase.
3.
Confirm the IPP selecting interface. After selecting input method, press and hold the function
setting key
for more than half a second (less than 2 seconds). Now, the IPP setting
function is completed and the value next to IPP will light without flash.
4.
Exit from the setting interface. Press and hold function setting key
for more than 2
seconds, exit from the setting interface and return to main interface.
4.6.3 Output Voltage Setting
1.
Enter the setting interface. Press and hold the function setting key
for more than 2
seconds, then come to setting interface, press and hold the inquiring key (
,
)
for
more than half a second(less than 2 seconds), select the function setting, choose output
voltage setting interface, at the moment, the letters “OPU” will flash.
2.
Enter the output voltage setting interface. Press and hold the function setting key
for
more than half a second(less than 2 seconds), then come to setting interface of output voltage
OPU, at this time, the letters “OPU” will not flash any more. The numerical value next to the
OPU will flash. Press and hold the inquiring key (
,
)
for more than half a second (less
than 2 seconds), select the numerical value in accordance with “OPU” function. The provided
