46
M2 ASSEMBLY GUIDE
Once the M2 is moved to the center, click the blue “Set Home” button to set home. X, Y, and
Z are now set to zero (0,0,0)on the M2 and will be remembered on the M2’s internal memory.
You are now able to jog your M2!
11. SET Z-HEIGHT:
Set the height of your bit to touch the surface of your material, so it will cut the depth you
choose in your CAM software. To set, change the units to “1mm” and click the “Z-” until your
bit is barely touching the surface of the material you want to cut. Click the Home in the Z Axis
position to set the new Z-height on your M2. You are now ready to load your Gcode into CNCjs
and start cutting your project!
The home position must be set on your M2 before you can CNC. To home, move the M2 sled
and chains to the center of your wasteboard using the X-, X+, Y-, and Y+ jog commands on the
right.
This work is licensed under the creative commons Attribution
NonCommercial-NoDerivatives 4.0 International license.
Last Updated 8.12.2020
Version 1.8
