BUILDING THE DEFAULT FRAME PG. 5
LAST UPDATE 05.22.19
FRONT LEG
KICKER
FRONT LEG
BACK LEG
KICKER
FIGURE 1
FIGURE 2
FRONT CROSSMEMBER
SPACER
FRONT
CROSSMEMBER
FRONT
CROSSMEMBER
LOWER 82”
FRONT LEG
SPACER
FIGURE 4
FRONT LEG
FRONT
CROSSMEMBER
UPPER 82”
VERTICALS 34”
Just use to measure, DO NOT ATTACH!
SPACER
FRONT LEG
SPACER
SPACER
FIGURE 3
FRONT LEG
VERTICALS 34”
FRONT
CROSSMEMBER
UPPER
FRONT
CROSSMEMBER
LOWER
DIAGONAL 28”
DIAGONAL 28”
VERTICAL
FIGURE 5
VERTICAL
CROSSMEMBER
STEP 5A ATTACH LOWER FRONT CROSSMEMBER
• Rest lower front crossmember on kickers
• Screw from top of crossmember into each
kicker-
see Figure 1
• Screw from side of each front leg into
crossmember-
see Figure 2
STEP 5C ATTACH UPPER FRONT CROSSMEMBER
• Rest upper front crossmember on spacers
• Screw through sides of front legs into
crossmember
STEP 5B ADD SPACERS
• Use verticals to measure placement of
spacers on inside of front legs
• DO NOT ATTACH VERTICALS IN THIS STEP
• Screw through spacers into front legs
STEP 6 ATTACH VERTICALS
• Use diagonals to place verticals
• DO NOT ATTACH DIAGONALS IN THIS STEP
• Screw through top crossmember into verticals
• Screw through bottom crossmember into
verticals
View from above, front
legs horizontal to floor,
back legs sticking up
