START UP
Engine:
Open the fuel cock.
If the engine is cold, the primer must be activated.
If it were hot the primer does not need to be operated.
Move the engine start switch to the "ON" position.
Move the accelerator to the low speed position.
Once the engine is switched on, disengage the primer. If the engine oil level is low, the engine
It will not start.
Recommendations:
Firmly stand with your legs open to better support the start of the machine.
When operating in fresh cement do not allow the trowel to work on the same area for a long time.
Each pass with the trowel must be 90 degrees from the previous one. This tactic will diminish the creation
of "valleys" in the concrete.
Check the engine air filter daily according to MAINTENANCE instructions.
MACHINERY
6
-
-
-
-
-
-
-
-
power trowel MAKER MT36
-
4
Instruction manual power trowel
