Plug the USB plug into the computer’s USB port (or the charger
with a DC5V output USB port).When connected,the indicator of
the USB charging cable will on.Then connect the battery to the
USB charging cable.
Charging the drone battery
WARNING
Do not leave the battery unattended while charging & only use
the supplied battery or plug charger.
1. It is recommended to connect the battery plug cable to the drone battery socket before
inserting the battery into drone battery chamber. The LED on the drone will start to flash.
Place the drone down on a flat surface
2. Turn on your controller. Your controller will beep once & LED light will flash
power swith
Pairing your drone to the controller
The indicator light off means it is in charging; and the indicator light
on means it is fully charged
.
Charge takes 30-40 minutes.For safety,
it's better to keep the charger in sight when charging.