KF-35
makfa
info@makfa.com
www.makfa.com
7
0
CLEAR
1
2
3
4
5
6
7
8
9
LOCK
Close:enter 3-6 digits,press LOCK
Open:enter same code
MINUTE
HOUR
Close:enter 3-6 digits,press LOCK
Open:enter same code
Close:enter 3-6 digits,press LOCK
Open:enter same code
0
CLEAR
1
2
3
4
5
6
7
8
9
LOCK
0
CLEAR
1
2
3
4
5
6
7
8
9
LOCK
0
CLEAR
1
2
3
4
5
6
7
8
9
LOCK
Close:enter 3-6 digits,press LOCK
Open:enter same code
LOCK
LOCK
You need to enter a 6-digit time.
Enter the hour in two digits for the first and second digits.
Enter the minute in two digits for the third and fourth digits.
Enter the day in two digits for the fifth and sixth digits.
Press the 'LOCK' button.
For example: To set the date and time to 30-03-2023, 13:14:15, enter the numbers in
sequence: 30 03 23, then press the 'LOCK' button. Enter 13 14 15, then press the 'LOCK'
button again. The screen will display 'GOOD,' indicating that the date and time are set.
If you have a hand terminal, keep in mind that this process can be more easily done with it.
To set the time with a hand terminal, refer to the hand terminal user manual.
OTHER FEATURES
When you enter the wrong number, press the 'CLEAR' button to
erase the entered number.
When you enter the user password incorrectly, the screen will
display 'E-CODE'.
If the user password is entered incorrectly 4 times, the screen will
show 'HOLD05.' You can re-enter your password after 5 minutes.
This time period will automatically reset.
When the safe is locked and in sleep mode, you can check the
battery status by looking at the 'LOCK' button. If the battery is in
good condition, it will display 'BAEE-H.' If the battery is low, it will
display 'BAEE-L.
If only 'BAEE-L' is displayed on the screen during operation, replace
the batteries with alkaline batteries, paying attention to the polarities.
If you do not replace the batteries, you may need to power the safe
with the hand terminal.
Summary of Contents for KF-35
Page 1: ...USER MANUAL KF 35...
