Page
14
of
37
3.2.5 Loading and unloading at ground level
•
Prepare hook.
See ‘Hook Operation’ section 3.2.6
for details of how the hook functions
•
Position the device with lift arm
slightly higher than the lifting eye
•
Bring wheels close to load
•
Raise hands to reach hook
out sufficiently to engage
hook into lifting eye
•
Once hook is engaged, raise
powered lifting arm and lower
hands simultaneously
•
Raise lifting arm sufficiently so
that the load is clear of wheels
•
Adjust hand height to hands
neutral position
REVERSE PROCEDURE
– UNLOADING AT GROUND LEVEL
•
Lift handles and lower lifting arm to put load on the ground
•
Disengage hook
•
See ‘Hook Operation’ section 3.2.6 for details of how hook functions
This section explains how to get a load at ground level engaged onto the device and in a hands
neutral position. A
hands neutral position
is when the device is loaded, and the load is balanced
against the weight of the device resulting in minimal balancing force required by the hands.
LOADING PROCEDURE
Summary of Contents for PHT2-140
Page 1: ...Rev 0919...
Page 32: ...Page 32 of 37 9 CHARGER SPECIFICATIONS 3A...
Page 37: ...Page 37 of 37...
