Page
3
of
37
FORWARD
Thank you for purchasing a MAKINEX product.
This manual provides information and procedures to safely operate and maintain the
PHT2-140 device
. For yours and/or other’s safety and protection from injury, carefully read,
understand and observe the safety instructions described in this manual.
Keep this manual or a copy of it with the machine. If you lose this manual or need an
additional copy, please contact MAKINEX. This machine is designed and built with user
safety in mind; however, it can present hazards if improperly operated and/or serviced.
Please follow the operating instructions carefully. If there are any questions regarding
operating or servicing of this machine, please contact MAKINEX.
The information contained in this manual was based on machines in production at the time
of publication. MAKINEX reserves the right to change any portion of this information without
notice.
All rights, especially copying and distribution rights are reserved.
Copyright 2019 by MAKINEX
No part of this publication may be reproduced in any form or by any means, electronic or
mechanical, including photocopying, without express written permission from MAKINEX.
Any type of reproduction or distribution not authorised by MAKINEX represents an
infringement of valid copyrights and will be prosecuted. We expressly reserve the right to
make technical modifications, without due notice, which aim at improving our machines or
their safety standards.
DISCLAIMER
Makinex and its affiliates take no responsibility for any damage, injury or death resulting
from the incorrect or unsafe use of this product. Use of this product should be
undertaken by competent persons only. It is the operator’s responsibility to ensure that
the following safety procedures are followed. If you are unsure, do not operate this
product.
Summary of Contents for PHT2-140
Page 1: ...Rev 0919...
Page 32: ...Page 32 of 37 9 CHARGER SPECIFICATIONS 3A...
Page 37: ...Page 37 of 37...
