4V2A1563 (E)
5 - 17
014
WAITING FOR RESET, ESP, RRW
OFF
One of the following conditions exists:
1. E-Stop *ESP (X08.4 or G8.4) is 0.
2. External reset ERS (G8.7) is 1.
3. The MDI panel reset button is on.
015
EXT. PROGRAM NO. SEARCH
External program number search is active.
016
BACKGROUND ACTIVE
Background editing mode is active.
Information indicating automatic operation stop/idle status
020
CUT SPEED UP/DOWN
E-stop signal *ESP (X08.4 or G8.4 =0), or servo
alarm occurred.
021
RESET BUTTON ON
Set when the reset key is pressed.
022
RESET AND REWIND ON
Reset rewind signal RRW (G8.6) turned on.
023
EMERGENCY STOP ON
The emergency stop signal *ESP (X08.4 or G8.4) is
0.
024
RESET ON
One of the following conditions exists:
1. E-Stop signal *ESP (X08.4 or G8.4) is 0.
2. External reset signal ERS (G8.7) is 1.
3. The MDI panel reset button is on.
025
STOP MOTION OR DWELL
Pulse distribution halted when 1. Check:
1. External reset ERS (G8.7) is 1.
2. E-Stop *ESP (X08.4 or G8.4) is 0.
3. Automatic operation stop *SP (G8.5) is 0.
4. The MDI panel reset button is
ON
.
5. Switched to manual mode (JOG/HANDLE/
etc.).
6. Other alarm occurred or condition occurred
for which no alarm exist.
TH
ALARM
STATUS
030
CHARACTER NUMBER TH DATA
The position of the character causing the TH alarm is
displayed, by No. of characters from the beginning of
the alarmed block.
031
TH DATA
Read code of character which triggered the TH
alarm.
T
ABLE
5-2
DETAILS
OF
CNC
STATUS
(
CONTINUED
)
Summary of Contents for V55
