4V2A1563 (E)
5 - 77
T
ABLE
5-25
SCHEMATIC
INTERPRETATION
DETAIL
EXAMPLE
2
Zone
Item Name
Explanation
1A
System
Component
I/O UNIT MT system area shown. GROUP#0 is the I/O
rack number, BASE#0 is the I/O rack base No., and
SLOT4 is the I/O module slot location.
If one I/O rack is supplied its is GROUP#0, a second I/O
rack would be GROUP#1.
Signal Address
and Meaning
TOOL UNCLAMP is the meaning of signal SL01. Below
that Y01.0 is the signal’s PMC address.
Source
Connector
C24HA is the wire number at connector C43, pins A18 and
B18, (C43-A18, B18) on the I/O module. Locator 143/2B
directs you to Sheet 143, Zones 2 and B for continuation
of the circuit. SL01 is the wire number at connector C43,
pin B17 (C43-B17).
1B
and
1C
Relay
Contact
Detail
The flag 2651 x50 is the wire specification between con-
nectors C43 and C04. C04 is a connector on the Relay
Panel using pin B17.
RELAY PANEL is the MTC area for this part of the circuit.
The relay switch detail, Zones 1B and 1C shows wiring for
normal switch positions, open or closed, pin numbers (5
and 9, 6 and 10, etc.) and the location, 202/2C and 191/
5C, of circuits using this relay.
2C
Relay
Circuit
S01 is the relay number and 13 and 14 are the relay coil
pin numbers. Pin 14 is wired to connector C04, pin B17
(C04-B17). C24L is wired at pin 13 and is continued to
Sheet 203, Zone 7C and Sheet 171, Zone 3C.
C24H is wired at relay pin 9 and with continuation of the
circuit to Sheet 361, Zone 5C and Sheet 203, Zone 6B.
S01 is wired at relay pin 5 with continuation of the circuit
directed to Sheet 202, Zone 2C. Wire S01 is carried to the
Main Panel by connector PT2, pin 14 (PT2-14).
1D
System
Component
The flag 22AWG BU is the specification for wire S01 from
PT2-14 to TB4-21 and to solenoid SOL01.
MAIN PANEL is the MTC area for this part of the circuit.
C24L is connected at TB4-22 with circuit continuation on
Sheet 421, Zone 4C (421/4C) and Sheet 482, Zone 3D
(482/3D).
TB4-21 is terminal block TB4, terminal 21.
The flag EXTERNAL means that S01 from TB4-21 to
solenoid SOL01 is external to the MTC.
2E
Solenoid
SOL01 is the Unclamp solenoid name, S01 is its wire
number, and 26W is the wattage rating of SOL01.
Summary of Contents for V55
