4V2A1563 (E)
7 - 61
illustrates the Y axis cover system.
lists the covers
and associated hardware by key number in
.
-
Component names shown in brackets [….] are names used in the
Parts Manual. Abbreviations PHS (Phillips Head or cross-head)
Screw) and SHCS (Socket Head Cap Screw) are used.
T
ABLE
7-12
Y
AXIS
COVER
SYSTEM
AND
HARDWARE
LEGEND
No.
Name
Mounting Hardware
Type
Size
Amt.
[1]
Gasket Retainer
PHS
M5 x 8
7
[2]
Gasket (3 Pieces)
-
-
-
[3]
Lower Column Cover
PHS
M5 x 8
24
[4]
Upper Column Cover [Cover]
PHS
M5 x 25
6
[5]
Y Ball Screw Cover [Cooling Device]
SHCS (at Front)
M6 x 10
5
SHCS (at Rear)
M6 x 8
2
WASHER (at Rear)
M6
2
[6]
Rear Table Cover
SHCS
M6 x 12
10
WASHER
M6
10
[7]
RH Side Cover
PHS
M5 x 8
7
[8]
RH Side Cover Bracket
PHS
M5 x 8
2
[9]
RH Rear Telescopic Cover
SHCS (at Table)
M6 x 12
7
WASHER (at Table)
M6
7
SHCS (at Joint)
M6 x 12
5
WASHER (at Joint)
M6
5
NUT (at Joint)
M6
5
[10] Joint Cover
M6 x 12 SHCS (1 ea.) from [9] and [11].
[11] RH Front Telescopic Cover
SHCS (at Table)
M6 x 12
7
WASHER (at Table)
M6
7
SHCS (at Joint)
M6 x 12
4
WASHER (at Joint)
M6
4
NUT (at Joint)
M6
4
SHCS (at Front)
M6 x 12
7
WASHER (at Front)
M6
7
[12] Front Table Cover [Cover (1)]
SHCS
M6 x 12
7
Washer
M6
7
Summary of Contents for V55
