A - 2
A.2.1
I/O Unit Alarms
A.2.2
Pallet Changer Alarms
I/O Unit Alarms
No.
Type
Message
00001
!
Group value parameter for the panel connection unit is too large
00002
!
Group value parameter for the I/O unit is doubly registered
00003
!
Group value parameter for the I/O unit is too large
00004
!
Wrong index type was set for the I/O unit
00005
!
Base value parameter for the I/O unit is too large
00006
!
Base value parameter for the I/O unit is doubly registered
00007
!
Base value parameter for the I/O unit is not continuous
00008
!
Abnormal card id for the I/O unit
00009
!
Group
value parameter for the I/O unit is not continuous
00010
!
Power Mate H is assigned to two groups
Pallet Changer Alarms
No.
Type
Message
01000
!
Parameter specified pallet changer type is illegal
01001
?
Pallet ready is off
01002
!
Pallet ready is off
01012
!
Pallet unclamp initial condition is not arranged
01013
!
Pallet unclamp condition is lost during motion
01014
!
Pallet unclamp is not completed within the time
01027
!
Pallet clamp initial condition is not arranged
01028
!
Pallet clamp condition is lost during motion
01029
!
Pallet clamp is not completed within the time
01042
!
Pallet change is disabled as Z is not ref. point
01052
!
Pallet change is motion illegal
01053
!
Pallet is to load but a pallet stays
01054
!
Pallet is to unload but stocker is not empty
01056
!
Pallet Illegal M code is specified
01071
!
Pallet seat check is disabled as pallet is not clamped
Summary of Contents for V55
