A - 6
A.2.5
ATC Alarms
05067
!
initial condition for pot clamp of takeout from mgzn is not set
05068
!
required condition for pot clamp of takeout from mgzn is lost
05069
!
pot clamp of takeout from mgzn is not end within the time
05070
!
initial condition for pot takeout from mgzn is not set
05071
!
required condition for pot takeout from mgzn is lost
05072
!
pot takeout from mgzn is not end within the time
05073
!
initial condition for pot move to atc-arm side is not set
05074
!
required condition for pot move to atc-arm side is lost
05075
!
pot move to atc-arm side is not end within the time
05076
!
maintenance mode is turned on during gripper motion
05077
!
gripper move is disabled due to maintenance mode on
ATC Alarms
No.
Type
Message
06000
!
ATC is disabled due to no reference return
06002
!
Spindle orient signal for ATC is unstable
06039
!
Initial condition for man. spndl tool clamp is not set
06040
!
Required condition for man. spndl tool clamp is lost
06041
!
Man. spndl tool clamp is not end within the time
06042
!
Initial condition for man. spndl tool uncl. is not set
06043
!
Required condition for man. spndl tool uncl. is lost
06044
!
Man. spndl tool uncl. is not end within the time
06066
?
Man. tool clamp/uncl. is disabled in auto. mode
06068
?
Man. tool clamp/uncl. is disabled due to rotating spndl
06079
!
Spndl tool uncl. is not end within the time
06081
!
Spndl tool clamp is not end within the time
06112
!
Parameter for ATC mgzn/arm type is illegal
06138
!
Spndl tool uncl. ready is not commanded
06248
!
ATC shutter open is not end within the time
06267
!
ATC shutter close is not end within the time
ATC Sub-Arm Alarms (continued)
No.
Type
Message
Summary of Contents for V55
