A - 30
118
PARENTHESIS
NESTING ERROR
The nesting of bracket exceeds the upper limit (quin-
tuple).
119
ILLEGAL ARGUMENT The SQRT or BCD argument is negative, and other
values than 0 to 9 are on each line of BIN argument.
122
DUPLICATE MACRO
MODAL- CALL
The macro modal call is specified in double.
123 CANNOT USE
MACRO COMMAND
IN DNC
Macro control command is used during DNC opera-
tion.
124
MISSING END
STATEMENT
DO - END does not correspond to 1:1.
125
FORMAT ERROR IN
MACRO
<Formula> format is erroneous.
126
ILLEGAL LOOP NUM-
BER
In DOn, 1£ n £3 is not established.
127
NC, MACRO STATE-
MENT
IN SAME BLOCK
NC and custom macro commands are confused.
128
ILLEGAL MACRO
SEQUENCE NUM-
BER
The sequence number specified in the branch com-
mand was not O to 9999. Or, it cannot be searched.
129
ILLEGAL ARGU-
MENT ADDRESS
An address not allowed in <Argument Designation>
is used.
130
ILLEGAL AXIS OPER-
ATION
An axis control command was given by PMC to an
axis controlled by CNC. Or an axis control command
was given by CNC to an axis controlled by the PMC.
131
TOO MANY EXTER-
NAL ALARM MES-
SAGES
Five or more alarms have generated in external
alarm message.
132
ALARM NUMBER
NOT FOUND
No alarm No. concerned exists in external alarm
message clear.
133
ILLEGAL DATA IN
EXT. ALARM MSG
Small section data is erroneous in external alarm
message or external operator message.
135
ILLEGAL ANGLE
COMMAND
The index table indexing positioning angle was
instructed n other than an integral multiple of the
value of the minimum angle.
136
ILLEGAL AXIS COM-
MAND
In index table indexing, another axis was com-
manded together with the B axis.
P/S Alarms (continued)
No.
Message
Contents
Summary of Contents for V55
