4V2A1563 (E)
A - 41
1. CNC Diagnostics for spindle alarm 750.
-
SPE:
0: Serial spindle control parameters match the spindle unit start
up conditions.
1: Serial spindle control parameters do not match the spindle
unit start up conditions.
-
S1E:
0: The 1st spindle serial start up was normal.
1: The 1st spindle was detected to have a fault during serial start
up.
-
SHE:
0: The serial communication module in the CNC is normal.
1: A fault was detected in the serial communication module.
A.3.12
System Alarms
NO.
#7
#6
#5
#4
#3
#2
#1
#0
409
SPE
S2E
S1E
SHE
SYS Alarms
No.
Message
Contents
900
ROM PARITY
ROM parity error (CNC/OMM/Servo).
910
RAM PARITY: (4N)
RAM parity error in the tape memory RAM module.
Clear the memory or replace the module.
911
RAM PARITY:
(4N + 1)
RAM parity error in the tape memory RAM module.
Clear the memory or replace the module.
912
RAM PARITY: (4N +
2)
RAM parity error in the tape memory RAM module.
Clear the memory or replace the module.
913
RAM PARITY: (4N +
3)
RAM parity error in the tape memory RAM module.
Clear the memory or replace the module.
914
SRAM PARITY (2N)
A RAM parity error occurred in RAM for part pro-
gram storage or additional SRAM. Clear the mem-
ory, or replace the Main CPU board or additional
SRAM. Then set all data, including parameters.
915
SRAM PARITY (2+1)
916
DRAM PARITY
RAM parity error in DRAM module. Replace the
DRAM module.
Summary of Contents for V55
