Makita 0088381081764, Instruction Manual

4

ENGLISH (Original instructions)

Explanation of general view

SPECIFICATIONS

• Due to our continuing program of research and development, the specifications herein are subject to change without 

notice.

• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003

Intended use

ENE052-1

The tool is intended for the sanding of large surface of 
wood, plastic and metal materials as well as painted 
surfaces.

Power supply

ENF002-2

The tool should be connected only to a power supply of 
the same voltage as indicated on the nameplate, and can 
only be operated on single-phase AC supply. They are 
double-insulated and can, therefore, also be used from 
sockets without earth wire.

General Power Tool Safety 

Warnings

GEA010-1

 WARNING Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury.

Save all warnings and 

instructions for future reference.

SANDER SAFETY WARNINGS

GEB021-4

1.

Always use safety glasses or goggles. Ordinary 
eye or sun glasses are NOT safety glasses.

2.

Hold the tool firmly.

3.

Do not leave the tool running. Operate the tool 
only when hand-held.

4.

This tool has not been waterproofed, so do not 
use water on the workpiece surface.

5.

Ventilate your work area adequately when you 
perform sanding operations.

6.

Some material contains chemicals which may be 
toxic. Take caution to prevent dust inhalation and 
skin contact. Follow material supplier safety data.

7.

Use of this tool to sand some products, paints and 
wood could expose user to dust containing 
hazardous substances. Use appropriate 
respiratory protection.

8.

Be sure that there are no cracks or breakage on 
the pad before use. Cracks or breakage may cause 
a personal injury.

SAVE THESE INSTRUCTIONS.

 WARNING:

DO NOT let comfort or familiarity with product (gained 
from repeated use) replace strict adherence to safety 
rules for the subject product. MISUSE or failure to 
follow the safety rules stated in this instruction 
manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION: 

• Always be sure that the tool is switched off and 

unplugged before adjusting or checking function on the 
tool. 

Switch action (Fig. 1)

CAUTION: 

• Before plugging in the tool, always check to see that 

the tool is switched off. 

To start the tool, press the “ I ” side of the switch. To stop 
the tool, press the “O” side of the switch. 

ASSEMBLY 

CAUTION:

• Always be sure that the tool is switched off and 

unplugged before carrying out any work on the tool. 

1.

Switch

2.

Velcro sandpaper

3.

Base 

4.

Dust bag

5.

Groove

6.

Front fixing cardboard 

7.

Front side of paper dust bag 

8.

Claws 

9.

Upper part 

10. Notch
11. Guide 

Model

 BO4565 

Pad size 

112 mm x 190 mm 

Orbits per minute (min

-1

) 14,000 

Dimensions (L x W x H) 

219 mm x 112 mm x 139 mm 

Net weight 

1.2 kg 

Safety class 

/II