Makita 0088381607308, Instruction Manual

8 ENGLISH

Hold the tool firmly. Turn the tool on and wait until it 

attains full speed. Then gently place the tool on the 

workpiece surface. Keep the pad flush with the work

-

piece and apply slight pressure on the tool.

CAUTION:

• 

The sanding pad rotates clockwise during the 

loaded operation, but it may rotate counterclock-

wise during the no-load operation.

Polishing operation

For Model BO5041

CAUTION:

• 

Use only a Makita genuine sponge pad, felt pad 

or wool pad (optional accessories).

• 

Always operate the tool at low speed to prevent 

work surfaces from heating abnormally.

• 

Never force the tool. Excessive pressure may 

decrease the polishing efficiency and cause 

motor overload, resulting in tool malfunction.

1. Applying wax

► 

Fig.20:

1.

 Sponge pad

Use an optional sponge pad. Apply wax to the 

sponge pad or work surface. Run the tool at low 

speed to smooth out wax.

NOTE:

• 

First, wax a not conspicuous portion of the 

work surface to make sure that the tool will not 

scratch the surface or result in uneven waxing.

• 

Always run the tool at low speed. Running it at 

high speed may cause the wax to spatter.

2. Removing wax

► 

Fig.21:

1.

 Felt pad

Use an optional felt pad. Run the tool at low speed 

to remove wax.

3. Polishing

► 

Fig.22:

1.

 Wool bonnet

Use an optional wool pad. Run the tool at low speed 

and apply the wool pad gently to the work surface.

MAINTENANCE

CAUTION:

• 

Always be sure that the tool is switched off and 

unplugged before attempting to perform inspec-

tion or maintenance.

• 

Never use gasoline, benzine, thinner, alcohol or the 

like. Discoloration, deformation or cracks may result.

To maintain product SAFETY and RELIABILITY, 

repairs, carbon brush inspection and replacement, any 

other maintenance or adjustment should be performed 

by Makita Authorized Service Centers, always using 

Makita replacement parts.

OPTIONAL 

ACCESSORIES

CAUTION:

• 

These accessories or attachments are recom-

mended for use with your Makita tool specified 

in this manual. The use of any other accessories 

or attachments might present a risk of injury to 

persons. Only use accessory or attachment for 

its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service 

Center.
• 

Hook-and-loop type abrasive discs (with pre-

punched holes)

• 

Hook-and-loop type sponge pad

• 

Paper dust bag holder

(For BO5041 only)
• 

Hook-and-loop type felt pad

• 

Hook-and-loop type wool pad

• 

Paper dust bag

NOTE:

• 

Some items in the list may be included in the 

tool package as standard accessories. They 

may differ from country to country.