4
ENGLISH
Explanation of general view
SPECIFICATIONS
Symbols
END004-2
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
............. Read instruction manual.
Intended use
ENE033-1
The tool is intended for screw driving in wood, metal and
plastic.
SPECIFIC SAFETY RULES
GEB009-3
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to impact
wrench safety rules. If you use this tool unsafely or
incorrectly, you can suffer serious personal injury.
1.
Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal
parts of the tool “live” and shock the operator.
2.
Wear ear protectors.
3.
Check the socket carefully for wear, cracks or
damage before installation.
4.
Hold the tool firmly.
5.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
6.
The proper fastening torque may differ depending
upon the kind or size of the bolt.
Check the torque with a torque wrench.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
IMPORTANT SAFETY
INSTRUCTIONS
ENC007-2
FOR BATTERY CARTRIDGE
1.
Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
2.
Do not disassemble battery cartridge.
3.
If operating time has become excessively shorter,
stop operating immediately. It may result in a risk
of overheating, possible burns and even an
explosion.
4.
If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5.
Do not short the battery cartridge:
(1) Do not touch the terminals with any
conductive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain. A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
1.
Red part
2.
Button
3.
Battery cartridge
4.
Switch lever
5.
Lamp
6.
Reversing switch lever
7.
Socket
8.
Anvil
9.
Groove
10. Screw
11. Hook
12. Hex bolt
13. Angle head
14. Tooth
15. Straight head
16. Ratchet head
17. Standard bolt
18. Fastening torque
19. Proper fastening torque
20. Fastening time (S)
21. High tensile bolt
Model
BTL062
BTL063
Capacities
Standard bolt
M4 - M12
High tensile bolt
M4 - M8
Square drive
9.5 mm
No load speed (min
-1
)
0 - 2,000
Impacts per minute
0 - 3,000
Max. fastening torque
60 N•m
Overall length
387 mm
Net weight
1.6 kg
1.7 kg
Rated voltage
D.C. 14.4 V
D.C. 18 V
