13 ENGLISH
Changing the V-belt
1.
Remove the battery cartridge and the wheel.
2.
Loosen the hex socket bolts using the hex wrench
and then remove the cover .
1
2
►
1.
Hex socket bolt
2.
Cover
3.
While twisting the V-belt inside, turn the bolt on the
pulley (large) clockwise using the box wrench.
The V-belt will deviate from the track and come off as
you turn the bolt.
1
2
3
►
1.
V-belt
2.
Pulley (large)
3.
Box wrench
NOTICE:
Never turn the box wrench counter-
clockwise. Doing so loosen the bolt on the pulley
(large) and result in poor performance.
4.
Hook the new V-belt to the pulley (small). Put the
other end of the V-belt onto the half periphery of the
pulley (large) and then turn the bolt on the pulley (large)
clockwise using the box wrench.
The V-belt will get on the track as you turn the bolt.
1
2
3
►
1.
Pulley (small)
2.
Pulley (large)
3.
Box wrench
Make sure that all the guides on the internal circle of the
V-belt fit into the rails on the pulleys. All the rails on the
pulley must support the guides on the V-belt. If there is
a rail which does not support the guide, the V-belt is not
properly installed.
1
2
►
1.
Rail on the pulley
2.
Guide on the V-belt
Summary of Contents for 088381-731461
Page 31: ...31 ...
