12 ENGLISH
Removing jammed pin nails
WARNING:
Always make sure that the trigger
is released, and the battery cartridge and pin nails
are removed before removing jammed pin nails.
CAUTION:
Do not remove the jammed pin
nails with bare hands.
The pin nails may jump out of
the magazine and cause an injury.
1.
Remove all the pin nails left in the magazine.
2.
Unscrew the three hex bolts on the driver guide
cover using the hex wrench.
3.
Remove the jammed pin nails from the nail guide
grooves in the driver guide.
1
2
1
3
4
Fig.22
►
1.
Hex bolt
2.
Driver guide cover
3.
Contact top
cover
4.
Driver guide
NOTE:
If you find difficult to remove the jammed
pin nails, untighten the two hex bolts on the contact
top cover using the hex wrench and then take the
jammed pin nails out of the driver guide.
4.
Set the covers back in place and secure them over
the driver guide with the hex bolts.
NOTICE:
After clearing jams, always make sure
that the covers on the driver guide have been
reassembled correctly.
If the driver guide functions
improperly, reassemble them with the hex bolts.
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Cleaning magazine
Clean the inside of the magazine at regular intervals.
Blow or wipe off any dirt, dust, wood chips, and nail glue
accumulated in the guide grooves.
1
Fig.23
►
1.
Guide grooves
NOTICE:
Dirt and dust in the guide grooves may
affect the pin nails feeding resulting in occasional
dry firing.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual.
The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Pin nails
•
Safety goggles
•
Nose adapter (for fastening on flat surfaces)
•
Makita genuine battery and charger
NOTE:
Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
