background image

4.  When touching blades or adjusting the blade angle, wear protec

-

tive gloves. Blades can cut bare hands severely.

Work area safety

WARNING:

 

Keep the hedge trimmer away from electric 

lines and communication cables. Touching or approaching 

high-voltage lines with hedge trimmer can result in death or 

serious injury. Watch power lines and electrical fences around 

the work area before starting operation.

WARNING:

 

Use of this product can create dust containing 

chemicals which may cause respiratory or other illnesses. 

Some examples of these chemicals are compounds found in 

pesticides, insecticides, fertilizers and herbicides. Your risk 

from these exposures varies, depending on how often you do 

this type of work. To reduce your exposure to these chemi-

cals: work in a well ventilated area, and work with approved 

safety equipment, such as those dust masks that are specially 

designed to filter out microscopic particles.

1.  Operate the hedge trimmer under good visibility and daylight 

conditions only. Do not operate the hedge trimmer in darkness or 

fog.

2.  Start and operate the engine only outdoors in a well ventilated 

area. Operation in a confined or poorly ventilated area can result 

in death due to suffocation or carbon monoxide poisoning.

3.  During operation, never stand on an unstable or slippery surface 

or a steep slope. During the cold season, beware of ice and 

snow and always ensure secure footing.

4.  During operation, keep bystanders or animals at least 15 m away 

from the hedge trimmer. Stop the motor as soon as someone 

approaches.

5.  Before operation, examine the work area for wire fences, stones, 

or other solid objects. They can damage the blades.

Putting into operation

1.  Before assembling or adjusting the equipment, switch off the 

motor and remove the spark plug cap or the battery cartridge.

2.  Before assembling the blades or adjusting the cutting angle, 

wear protective gloves.

3.  Before starting the motor, inspect the equipment for damages, 

loose screws/nuts or improper assembly. Replace if the blades 

are cracked, bent, or damaged. Check all control levers and 

switches for easy action. Clean and dry the handles.

4.  Never attempt to start the motor if the equipment is damaged or 

not fully assembled. Otherwise serious injury may result.

5.  Adjust the shoulder harness and hand grip to suit the operator’s 

body size.

Operation

1.  In the event of an emergency, switch off the motor immediately.

2.  If you feel any unusual condition (e.g. noise, vibration) during 

operation, switch off the motor. Do not use the hedge trimmer 

until the cause is recognized and solved.

3.  The blades continue to move for a short period after releasing 

the throttle trigger or switch off the motor. Don’t rush to contact 

the blades.

4.  With the engine running only at idle, attach the shoulder harness.

5.  During operation, use the shoulder harness. Keep the hedge 

trimmer on your right side firmly.

► 

Fig.2

6.  Hold the front handle with the left hand and the rear grip with the 

right hand, no matter you are right-hander or left-hander. Wrap 

your fingers and thumbs around the handles.

7.  Never attempt to operate the equipment with one hand. Loss of 

control may result in serious or fatal injury. To reduce the risk of 

cut injuries, keep your hands and feet away from the blades.

8.  Do not overreach. Keep proper footing and balance at all times. 

Watch for hidden obstacles such as tree stumps, roots and 

ditches to avoid stumbling. Clear fallen branches and other 

objects away.

9.  Never work on a ladder or tree to avoid loss of control.

10.  Do not hold the machine above shoulder height.

11.  During operation, never hit the blades against hard obstacles 

such stones and metals. Take particular care when cutting 

hedges next to or against wire fences. When working close to the 

ground, make sure that no sand, grit or stones get between the 

blades.

12.  If the blades come into contact with stones or other solid objects, 

stop the motor immediately and check the blades for damage 

after removing the spark plug or the battery cartridge. Replace 

the blades if damaged.

13.  If thick branches get jammed in the blades, immediately switch 

off the motor, put the hedge trimmer down and then remove the 

obstruction after removing the spark plug or the battery cartridge. 

Check the blades for damage before using the equipment again.

14.  Never touch or approach the blades while they are moving. 

Blades can cut your finger easily. When handling the blades or 

adjusting the blade angle, stop the motor and remove the spark 

plug cap or the battery cartridge.

15.  Accelerating the motor with the blades blocked increases the 

load and will damage the motor and/or clutch.

16.  Check the cutting blades frequently during operation for cracks 

or blunt edges. Before the inspection, switch off the motor and 

wait until the blades stop completely. Replace damaged or dull 

blades immediately, even if they have only superficial cracks.

17.  If the equipment gets heavy impact or fall, check the condition 

before continuing work. Check the fuel system for fuel leakage 

and the controls and safety devices for malfunction. If there is 

any damage or doubt, ask our authorized service center for the 

inspection and repair.

18.  Do not touch the gear case. The gear case becomes hot during 

operation.

19.  Take a rest to prevent loss of control caused by fatigue. We rec

-

ommend to take a 10 to 20-minute rest every hour.

20.  When you leave the equipment, even if it is a short time, always 

switch off the engine or remove the battery cartridge. The equip

-

ment unattended with the engine running may be used by unau

-

thorized person and cause serious accident.

21.  Before cutting, pull the throttle lever fully to achieve the maxi

-

mum speed.

22.  Follow the instruction manual of the power unit for proper use of 

the control lever and switch.

23.  During or after operation, do not put the hot equipment onto dry 

grass or combustible materials.

Transport

1.  Before transporting the equipment, switch off the motor and 

remove the spark plug cap or battery cartridge. Always fit the 

blade cover during transportation.

2.  When carrying the equipment, carry it in a horizontal position by 

holding the shaft. Keep the hot muffler away from your body.

3.  When transporting the equipment in a vehicle, properly secure 

it to avoid turnover. Otherwise fuel spillage and damage to the 

equipment and other baggage may result.

Maintenance

1.  Before doing any maintenance or repair work or cleaning the 

equipment, always switch off the motor and remove the spark 

plug cap or the battery cartridge. Wait until the motor gets cold.

2.  To reduce the risk of fire, never service the equipment in the 

vicinity of fire.

3.  Always wear protective gloves when handling the blades.

4.  Always clean dust and dirt off the equipment. Never use gas

-

oline, benzine, thinner, alcohol or the like for the purpose. 

Discoloration, deformation or cracks of the plastic components 

may result.

5.  After each use, tighten all screws and nuts, except for the carbu

-

retor adjustment screws.

6.  Keep the cutting tool sharp. If the cutting blades have become 

blunt and cutting performance is poor, ask our authorized service 

center to sharpen the blades.

7.  Never repair bent or broken blades by straightening or welding. 

It may cause parts of the blades to come off and result in serious 

injury. Contact our authorized service center for Makita genuine 

blades to replace them.

8.  Do not attempt any maintenance or repair not described in this 

booklet or the instruction manual of the power unit. Ask our 

authorized service center for such work.

9.  Always use Makita genuine spare parts and accessories only. 

Using parts or accessories supplied by a third party may result 

in the equipment breakdown, property damage and/or serious 

injury.

10.  Request our authorized service center to inspect and maintain 

the hedge trimmer at regular interval.

Storage

1.  Before storing the equipment, perform full cleaning and mainte

-

nance. Fit the blade cover.

2.  Store the equipment in a dry and high or locked location out of 

reach of children.

3.  Do not prop the equipment against something, such as a wall. 

Otherwise the hedge trimmer may fall suddenly and cause an 

injury.

5 ENGLISH

Summary of Contents for 197733-7





































Reviews: